A range of F17 sizes in 35mm and 45mm thickness material is available in Tasmanian Oak with wider end sections generally offered as a edge laminated or plated product.

Lengths:
0.9 metres to 5.4 metres tallied in 300mm increments packed in 2.3 lengths per pack.

GoodWood SUPA 17TM

STRENGTH.  RELIABILITY. PERFORMANCE

GoodWood SUPA 17TM is a range of seasoned hardwood structural products manufactured from A17 grade Victorian Ash.  Visually stress graded in accordance with the Australian Standard AS 2082, SUPA 17TM  is externally audited to ensure product compliance and is ideal where high strength to weight ratio is required.

Rigorous external quality audits and greater spanning ability makes GoodWood SUPA 17TM superior to traditional F17.

Applications

Bearers                      Lintels
Counter beams         Rafters
Floor joists                Strutting beams
Hanging beams         Wall studs
Intermediate beams  Underpurlins

Features and Benefits

Straightness
Stability
Strength
Long lengths
Quality Assurance
Sustainable, AFS/PEFC certified resource
Cost efficiency
Easy handling – pencil round edges
Ready availability
Lyctus resistant
H2 Treated (LOSP) or untreated

Standards

Dressed Sizes

JOINT GROUP

GoodWood SUPA 17TM  has a Joint Group and Strength Group classification of JD3 and SD3.

LOSP Treated H2

LOSP = Light Organic Solvent Preservative.  Approved for use throughout Australia including
the Tropic of Capricorn.

- Non toxic, red treatment colour
- Impregnates the timber with synthetic pyrethoids, providing an envelope treatment to H2 as per AS 1604.1
- Suitable for both interior and protected above ground applications
- Tested by the Department of Primary Industries & Fisheries, QLD
- Forest Research Chemistry Laboratory Test Certificate 11212
- Available in solid up to 5.4 metres
- Rough sawn or dressed sizes, straight edged
- Lengths from 900 mm – 5.4 m in 300 mm increments
- 35 mm and 45 mm dressed